At Osborne Wood Products, all Standard Cabinet and Furniture feet will come unfinished and without any cuts or hardware. In order to make your project easier, Osborne offers services specifically for Cabinet and Furniture Feet that can be added to your order.
Please note that all orders with any of the following services added will be considered ‘Custom‘ and are not eligible for return.
You will need to order your products with these services through our Customer Service Department by calling 1-800-849-8876. Services cannot be done online.
Services for Cabinet and Furniture Feet:
Sanding, Millwork and More:
Sanding to 220 Grit– Our products are sanded to 150 grit as a standard. If you need your items sanded to 220 grit, we can do that for you as well. This additional sanding can only be done on Turnings made In House. Please check with our customer service representatives to make sure your items are eligible for this service. There is a $8.00 per item service charge on 220 Grit Sanding.
No Sanding– We can ship an item without any sanding. The item must be manufactured In House. There is no additional charge for this service. Please check with our customer service representatives to make sure your items are eligible for this service.
Hand Select– We can hand select from in stock items for specific traits. An example of this would be hand selecting a knotty pine leg for the greatest number of knots, or hand selecting a soft maple leg for the least amount of color variation. There is a $5.00 fee per item for this service. This service only applies to items that are currently in stock. Please check with our customer service representatives to make sure your items are eligible for this service.
Hand Select from Raw Material – On items made in house that are not in stock we can hand select the raw lumber for specific traits. An example of this would be hand selecting a knotty pine leg for the greatest number of knots, or hand selecting a soft maple leg for the least amount of color variation. There is a $10.00 fee per item for this service. This service only applies to items that are currently out of stock and are made In House. Please check with our customer service representatives to make sure your items are eligible for this service.
Solid Stock Only– You may request that only solids be sent for an item when they are available in stock. Items over 3.5″ wide are almost impossible to get as solids, as they tend to crack easily. Some wood types it is hard to get in solids under 3.5″ wide as well, so if it is not in stock our customer service representatives may need to check with production before putting this service in. The fee for this is $5.00 per item.
Exterior Glue– Although we do not recommend our products for exterior use you may request exterior glue be used in the production of your products. The items must be manufactured In House. There is a $6.00 per item service charge for using exterior glue. Please check with our customer service representatives to make sure your items are eligible for this service.
Drill Hole– We are able to drill a hole (less than 3 ¾” deep) of varying diameters for hardware. The hole may be drilled on the top or bottom of the item and will be no deeper than 3 ¾”. The service charge is $1.50 per hole drilled.
Custom Milling– Do you have a milling need not mentioned in this section? Contact our friendly customer service representatives for a quote to meet your milling needs. 1-800-849-8876
Installation:
Install Bolt/Screw– Our Screw Dowels (Part 910HW or 916HW), or Hanger Bolts (Parts 920HW, 925HW, or 930HW) can all be installed in your product. Hardware will be installed in the top or bottom center of the product. There is an install charge of $1.75 per hardware installed plus the cost of the hardware.
Custom Install Hardware– Can’t find the installation you need for your product? Request a custom install with our friendly customer service staff at 1-800-849-8876. Prices will vary depending on service.
Please feel free to take full advantage of the services listed above! Our customer service representatives are standing by, and will assist you in determining exactly what you need in order to successfully complete your project.
If there is a custom service required, but it is not included on this list, please call us! We would love to check the available options for you in order to help meet your woodworking needs.
Our friendly staff is on the line from 8am to 7pm EST ready to assist you. Please call 1-800-849-8876 to speak with a representative today.
